Introduction:
The crystal structure is close to a spherical structure, with extremely low impurity content, small particle size, concentrated particle size distribution, good temperature resistance, reaching above 208°C, low oil absorption rate, and good fluidity.
When used in cable materials, it has lower porosity and better water resistance than other similar products.
Adapt to high-speed extrusion of cables.
Also can be used in heat-shrinkable material, plastic, and rubber reinforcement, especially in some insulation materials such as unsaturated polyester, epoxied resin, etc.
A1 products comply with RoHs and Reach requirements
Packing & Storage
25kg PP woven bag, with PE liner.
Store in a dry location. It can be stored normally for 6-8 months.
Use promptly after opening.
Grade | A1 |
Al(OH)3 | ≥ 99.50% |
SiO2 | ≤ 0.01% |
Fe2O3 | ≤ 0.01% |
Na2O | ≤ 0.20% |
Na2O (S) | ≤ 0.02% |
Whiteness | ≥ 95 % |
Moisture (%) | ≤ 0.4% |
Oil absorption | ≤ 30 ml/100g |
pH value | ≤9.5 |
Conductivity | ≤30 μs/cm |
Loss on ignition | 34.5±0.2% |
Particle Size D50 | 1.50 – 1.70 μm |
In order to have an intuitive comparison of performance, we have made a performance and flame retardant comparison in different formulas, which can provide information to help you distinguish the differences between A1, 40CD, and 104LEO
Similar performance, but A1 has better cost saving
Construct high-level intelligent production lines, equipped with automated packaging machines, Realize product filling, packing, palletizing, and wrapping the film in the whole area without workers’ participation. Accurately control product quality, quantity and batch number.
KMT Industry’s goal is to let you sit back and relax. We take care of all the dirty works, including trade stuff, clearance and logistics, etc. Our consultant will keep you informed of the trade progress throughout.
If you want a basic formula to compare with competitors grades, we can support it in our lab.
Normal grades have the inventory to support fast delivery.
If you want to have a trial test, we support a minimum order quantity of small kgs for the first order.